Shop
Connect
Skip to product information
Ring Moulds
£60.00
Full Set of 29 Ring Moulds
Everything you need to craft your own beautiful ring bands from A to Z+3 These moulds are designed to pair perfectly with our ring bands or to create your own unique designs.
Sizing:
All moulds are based on UK ring sizes.
|
Circumference |
Inside Diameter |
Ring Size |
|
(mm) |
(mm) |
UK |
|
37.8mm |
11.9mm |
A |
|
39.1mm |
12.3mm |
B |
|
40.4mm |
12.7mm |
C |
|
41.7mm |
13.1mm |
D |
|
42.9mm |
13.5mm |
E |
|
44.2mm |
13.9mm |
F |
|
45.5mm |
14.3mm |
G |
|
46.8mm |
14.7mm |
H |
|
48.0mm |
15.1mm |
I |
|
48.7mm |
15.5mm |
J |
|
50.0mm |
15.9mm |
K |
|
51.2mm |
16.3mm |
L |
|
52.5mm |
16.7mm |
M |
|
53.8mm |
17.1mm |
N |
|
55.1mm |
17.5mm |
O |
|
56.3mm |
17.9mm |
P |
|
57.2mm |
18.2mm |
Q |
|
58.9mm |
18.6mm |
R |
|
60.2mm |
19.1mm |
S |
|
61.4mm |
19.5mm |
T |
|
62.7mm |
20.0mm |
U |
|
64.0mm |
20.3mm |
V |
|
65.3mm |
20.7mm |
W |
|
66.6mm |
21.1mm |
X |
|
67.8mm |
21.5mm |
Y |
|
68.5mm |
21.9mm |
Z |
|
70.0mm |
22.2mm |
Z+1 |
|
71mm |
22.6mm |
Z+2 |
|
72.5mm |
23.0mm |
Z+3 |
Material:
Made from Polylactic Acid (PLA) a biodegradable, eco-friendly thermoplastic derived from renewable sources like corn starch and sugarcane.
Heat Guidelines:
These moulds are safe to use with up to heat 60°C (140°F).
Do not remove the moulds while hot. Let them cool completely before handling to avoid damage. Exposure to higher temperatures may cause warping or melting.
Tips for Using Your Ring Moulds:
- Wrap a strip of paper around the mould to prevent clay from sticking.
- Roll your clay to the desired thickness.
- Gently wrap the clay around the mould.
- Trim the ends so they meet cleanly.
- Join the ends with slip or create an adjustable ring design.
- Allow the clay to dry completely before removing from the mould.
Working with metal clay
Be sure to factor in the shrinkage rate of your specific brand, this will affect your final ring size.
Care Instructions:
Hand wash tools with warm (not boiling) soapy water and allow them to dry thoroughly.
Safety Notice:
This product is not a toy and is not suitable for children of any age.
How They're Made:
Each mould is 3D printed using FDM (Fused Deposition Modelling) technology. The layered print lines may occasionally leave subtle marks on the clay please keep this in mind before purchasing.
Follow along on Instagram @sullysclay for free tutorials, expert tips, and a behind-the-scenes look into my creative process. Join a vibrant and supportive community of makers just like you.