Umbrella Embossing

30mm set 

Embossing depth 0.75mm ( 3 cards ) 

How to Use: Prepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.

Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.

Tips: 

1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter/embossing lines. ( May not work on cutters that have lots of embossing lines) 

2-Apply texture before you cut out your design

3-Be careful not to over emboss as this can create weak spots which can break.

Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.

Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard

Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.

How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.