Jump Ring Cutter (Cut out)

Size available:

5mm Outer- 2mm inner

6mm outer- 2.5mm inner

7mm outer -3mm inner 

8mm outer- 4mm inner 

9mm outer- 4.50mm inner 

10mm outer- 5mm inner 

Full Set 

(please contact me if you want alternative sizes) 

How to Use: Prepare the Clay by roiling your clay to the desired thickness, then lay cling film over the top. This create a beautiful curved edge. 

Cut the Clay- Place the cutter on the cling film and clay and press down to cut. Gently rotate your cutter back and forth then lift the cutter off. 

Sully’s Tip: roll thinner then join two together with some silver clay paste to create a rounded version on both sides. 

Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.

Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.

Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard

Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.

How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.