Jump Ring Cutter

Size available:

5mm Outer- 2mm inner

6mm outer- 2.5mm inner

7mm outer -3mm inner 

8mm outer- 4mm inner 

9mm outer- 4.50mm inner 

10mm outer- 5mm inner 

Full Set 

(please contact me if you want alternative sizes) 

These cutter are small so they have solid middles which means they push the middle around to buff up the outer shape. 

How to Use: Prepare the Clay by roiling your clay to the desired thickness, then lay cling film over the top. This create a beautiful curved edge. 

Cut the Clay- Place the cutter on the cling film and clay and press down to cut. Gently rotate your cutter back and forth then lift the cutter off. 

Sully’s Tip: roll thinner then join two together with some silver clay paste to create a rounded version on both sides. 

Dry and Fire - Let the clay dry completely, then fire it according to the instructions for your metal clay.

Care Instructions: Hand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.

Safety Notice: This product is not a toy and is not suitable for children. Choking Hazard

Material: Made from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.

How They’re Made: Each cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.