{"title":"New In ✨","description":null,"products":[{"product_id":"moth","title":"Luna Moth","description":"\u003cp\u003e\u003cstrong\u003e20mm, 25mm,30mm,35mm,40mm,45mm,50mm and 60mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54968251646295,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54968251711831,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54968251744599,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54973439476055,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54973439508823,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54973439541591,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54973439574359,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"60mm","offer_id":54973439607127,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54968251777367,"sku":null,"price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/75383DA7-089B-4AA8-8B19-F0D959CF84B8.jpg?v=1788981327"},{"product_id":"moth-embossing","title":"Moth Embossing","description":"\u003cp\u003e 20mm, 25mm,30mm,35mm,40mm.45mm,50mm and 60mm\u003c\/p\u003e\n\u003cp\u003eEmbossing Depth 1mm ( 4 Cards )  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLet the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter\/embossing lines. ( May not work on cutters that have lots of embossing lines) \u003c\/p\u003e\n\u003cp\u003e2-Apply texture before you cut out your design\u003c\/p\u003e\n\u003cp\u003e3-Be careful not to over emboss as this can create weak spots which can break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54968254693719,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54968254759255,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54968254824791,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54973490757975,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"40mm","offer_id":54973490790743,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"45mm","offer_id":54973490823511,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"50mm","offer_id":54973490856279,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"60mm","offer_id":54973490889047,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54973428072791,"sku":null,"price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/EBFFD400-8950-405F-8ED7-E0DCBDAF62C8.jpg?v=1788981409"},{"product_id":"oak-leaf-1","title":"Oak Leaf 1","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54968255938903,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54968255971671,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54968256004439,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54968256069975,"sku":null,"price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/5C3D455E-B721-4A6B-A71B-83D2C5620321.jpg?v=1788981493"},{"product_id":"oak-leaf-2","title":"Oak Leaf 2","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54968259215703,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54968259248471,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54968259281239,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54968259314007,"sku":null,"price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/7ADBE34A-88AB-4324-9A17-9611D555A9BE.jpg?v=1788981574"},{"product_id":"micro-snakes","title":"Micro Snakes","description":"\u003cp\u003e\u003cstrong\u003eMirrored 20mm,25mm 30mm \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: These cutters are small and detail that the cutter will need to be clean carefully afterwards within the caps. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54968266129751,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54968269668695,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54968269701463,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54968269734231,"sku":null,"price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/IMG-8921.jpg?v=1788981762"},{"product_id":"micro-oak-leaf-1","title":"Micro - Oak leaf 1","description":"\u003cp\u003e\u003cstrong\u003e10mm,12mm,15mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Clay\u003c\/strong\u003e - Place the cutter on the clay and press down to cut the shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClay Stuck?\u003c\/strong\u003e - Apply a small amount of oil to the end of the push pen. Align the size indicators so the stamp fits properly inside the cutter, then press down. Your clay will pop out easily!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded edges?\u003c\/strong\u003e Use clingfilm \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYour push stamp can also be used as a detailing tool! Simply apply a light coat of oil to the surface and test on scrap clay to perfect your pressure and achieve the ideal depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"10mm","offer_id":54968271503703,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"12mm","offer_id":54968271536471,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"15mm","offer_id":54968271569239,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54968271602007,"sku":null,"price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/417A049C-6F69-4CDE-84ED-57D40B5114EC.jpg?v=1788982072"},{"product_id":"micro-oak-leaf-2","title":"Micro - Oak leaf 2","description":"\u003cp\u003e\u003cstrong\u003e10mm,12mm,15mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Clay\u003c\/strong\u003e - Place the cutter on the clay and press down to cut the shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClay Stuck?\u003c\/strong\u003e - Apply a small amount of oil to the end of the push pen. Align the size indicators so the stamp fits properly inside the cutter, then press down. Your clay will pop out easily!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded edges?\u003c\/strong\u003e Use clingfilm \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYour push stamp can also be used as a detailing tool! Simply apply a light coat of oil to the surface and test on scrap clay to perfect your pressure and achieve the ideal depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"10mm","offer_id":54968271929687,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"12mm","offer_id":54968271962455,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"15mm","offer_id":54968271995223,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54968272027991,"sku":null,"price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/5312B599-A41B-4602-BE68-B54BBC3EA0B8.jpg?v=1788982107"},{"product_id":"goddess","title":"Goddess Embossing","description":"\u003cp\u003e20mm, 25mm, 30mm\u003c\/p\u003e\n\u003cp\u003eEmbossing Depth 1mm ( 4Cards )  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLet the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter\/embossing lines. ( May not work on cutters that have lots of embossing lines) \u003c\/p\u003e\n\u003cp\u003e2-Apply texture before you cut out your design\u003c\/p\u003e\n\u003cp\u003e3-Be careful not to over emboss as this can create weak spots which can break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54977054605655,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54977054638423,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54977054671191,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54977054736727,"sku":null,"price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/776D4A24-5108-49FC-A3A0-FA801F388405.jpg?v=1789055518"},{"product_id":"cheese-plant","title":"Cheese Plant","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: These cutters are small and detail that the cutter will need to be clean carefully afterwards within the caps. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54977059848535,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54977062666583,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54977059881303,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54977059979607,"sku":null,"price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/BAB2FE44-E717-425E-98B4-C9DE83229D68.jpg?v=1789055660"},{"product_id":"ram","title":"Ram","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: These cutters are small and detail that the cutter will need to be clean carefully afterwards within the caps. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54977075544407,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54977075577175,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54977075609943,"sku":null,"price":3.5,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54977075642711,"sku":null,"price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/D0887954-FF61-47F4-957F-C9ABB57518C1.jpg?v=1789056075"},{"product_id":"skinny-moon","title":"Skinny Moon","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm,35mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54977093763415,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54977093796183,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54977093828951,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54977093861719,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54977093894487,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/7A90FE50-99C7-46EE-B9DF-AFBADC97235C.jpg?v=1789056204"},{"product_id":"skinny-star","title":"Skinny Star","description":"\u003cp\u003e\u003cstrong\u003e20mm,25mm,30mm,35mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTexture? \u003c\/strong\u003eAdd before cutting to keep your designs sharp and centred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Cla\u003c\/strong\u003ey - Place the cutter on the clay and press down firmly to cut the strip. Gently lift the cutter off the clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips!\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ePlace a layer of cling film between your clay and cutter to create soft, rounded edges. (Non textured pieces)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"20mm","offer_id":54977109721431,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54977109754199,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54977109786967,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"35mm","offer_id":54977109819735,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54977109852503,"sku":null,"price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/3867FDDE-DA61-4A1E-9884-F27593D93C0D.jpg?v=1789056384"},{"product_id":"mini-micro-christmas-set","title":"Mini Micro Christmas Set","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10mm bear set \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12mm Candy set \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12mm North Star \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12mm Stag \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10mm Tree \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to the desired thickness. Lightly Oil the edge of the clay cutter to prevent sticking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut the Clay\u003c\/strong\u003e - Place the cutter on the clay and press down to cut the shape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClay Stuck?\u003c\/strong\u003e - Apply a small amount of oil to the end of the push pen. Align the size indicators so the stamp fits properly inside the cutter, then press down. Your clay will pop out easily!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRounded edges?\u003c\/strong\u003e Use clingfilm \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire\u003c\/strong\u003e - Let the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYour push stamp can also be used as a detailing tool! Simply apply a light coat of oil to the surface and test on scrap clay to perfect your pressure and achieve the ideal depth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"Bears","offer_id":54977166934359,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Candy Cane","offer_id":54977166967127,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Stag","offer_id":54977166999895,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"North star","offer_id":54977167032663,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Tree","offer_id":54977167065431,"sku":null,"price":5.0,"currency_code":"GBP","in_stock":true},{"title":"Full Set","offer_id":54977188757847,"sku":null,"price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/259B5D4A-C202-4602-A114-25C43CF6517D.jpg?v=1789056767"},{"product_id":"tile-1-embossing","title":"Tile 1 Embossing","description":"\u003cp\u003e15mm,  20mm, 25mm,30mm\u003c\/p\u003e\n\u003cp\u003eEmbossing Depth 1mm ( 4 Cards )  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLet the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter\/embossing lines. ( May not work on cutters that have lots of embossing lines) \u003c\/p\u003e\n\u003cp\u003e2-Apply texture before you cut out your design\u003c\/p\u003e\n\u003cp\u003e3-Be careful not to over emboss as this can create weak spots which can break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"15mm","offer_id":54983893320023,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":54983886963031,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54983886995799,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54983887028567,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54983887225175,"sku":null,"price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/7E0180C1-8299-4471-9564-1188D35AD4B7.jpg?v=1789128735"},{"product_id":"tile-2-embossing","title":"Tile 2 Embossing","description":"\u003cp\u003e15mm,  20mm, 25mm,30mm\u003c\/p\u003e\n\u003cp\u003eEmbossing Depth 1mm ( 4 Cards )  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLet the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter\/embossing lines. ( May not work on cutters that have lots of embossing lines) \u003c\/p\u003e\n\u003cp\u003e2-Apply texture before you cut out your design\u003c\/p\u003e\n\u003cp\u003e3-Be careful not to over emboss as this can create weak spots which can break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"15mm","offer_id":54983902036311,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":54983902069079,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54983902101847,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54983902134615,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54983902167383,"sku":null,"price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/F3ED9FC8-2998-4686-91FA-59A24513221F.jpg?v=1789128774"},{"product_id":"tile-3-embossing","title":"Tile 3 Embossing","description":"\u003cp\u003e15mm,  20mm, 25mm,30mm\u003c\/p\u003e\n\u003cp\u003eEmbossing Depth 1mm ( 4 Cards )  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrepare the Clay - Roll your clay to a minimum of 0.25mm thicker than your Embossing depth lines of cutter.  Oil the edge and embossing surface of the clay cutter to prevent sticking. Place the cutter on the clay and press down to cut the outline and the embossing detail will leave an imprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry and Fire -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLet the clay dry completely, then fire it according to the instructions for your metal clay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1-Use clingfilm to achieve rounded edges, this also helps clay sticking to the cutter\/embossing lines. ( May not work on cutters that have lots of embossing lines) \u003c\/p\u003e\n\u003cp\u003e2-Apply texture before you cut out your design\u003c\/p\u003e\n\u003cp\u003e3-Be careful not to over emboss as this can create weak spots which can break.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCare Instructions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHand wash only in warm, soapy (not boiling) water. Do not bake or expose to high heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Notice:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis product is not a toy and is not suitable for children. Choking Hazard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from Polylactic Acid (PLA) – a biodegradable, bioactive thermoplastic derived from renewable resources like corn starch and sugarcane. Cutter colour may vary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow They’re Made:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEach cutter and stamp are 3D printed using FDM (Fused Deposition Modelling). Fine layer lines may occasionally transfer to clay please note this before purchasing.\u003c\/p\u003e","brand":"Sully’s Clay","offers":[{"title":"15mm","offer_id":54983908884823,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"20mm","offer_id":54983908917591,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"25mm","offer_id":54983908950359,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"30mm","offer_id":54983908983127,"sku":null,"price":6.0,"currency_code":"GBP","in_stock":true},{"title":"Full set","offer_id":54983909015895,"sku":null,"price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/files\/4538CAE6-FAE1-40F4-850B-EAD1E6B3CB8B.jpg?v=1789128815"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0959\/3516\/8855\/collections\/EF3FD538-E9EF-4305-87BD-84E19B59D226.jpg?v=1788982149","url":"https:\/\/sullysclay.co.uk\/collections\/new-in-%e2%9c%a8.oembed","provider":"Sully’s Clay","version":"1.0","type":"link"}